Powder
Coating
Electrostatic application cured at 400°F for a finish that outlasts wet paint in abrasion, impact, and UV. Standard and custom colors, textures, and clears.
Built for production. Finished right.
Protec Industrial Coatings runs production finishing for fabricators, OEMs, fleets, and contract manufacturers across Central Texas. Racked, coated, cured, inspected — and back on your truck when we said it would be.
Scroll
ST-01Who We Are
1510 Brandi Ln
A working shop,
not a showroom.
Protec Industrial Coatings is an industrial finishing operation in Round Rock, Texas. Our floor is concrete, our walls wear overspray, and our ovens run hot all day — because that's what it takes to move real production volume.
We built this shop for the work most finishers turn away: full production runs, heavy weldments, fleet equipment, structural steel, and recurring contract coating for OEMs and fabricators. Pretreatment, coating, and curing all happen under one roof, on one schedule we control.
No middlemen, no mystery. You deal directly with the people racking and spraying your parts, and every job leaves here checked against spec — not just "looks good from the dock."
Job TravelerPIC-0001
LocationRound Rock TX
Cure Temp0°F
Film Build2–4 MILS TYP.
Core Processes0
OperationMon–Fri 0800–1630
Passed QC
ST-02Capabilities
Three processes · One roof
Powder
Clear Chemical
Conversion
Chem film (chromate conversion) on aluminum for corrosion protection and paint adhesion — as a pretreat under coating or a standalone finish.
Industrial
Wet Paint
For assemblies, substrates, and spec requirements that can't take the oven, our booth handles primers and industrial liquid topcoats.
Is your job a fit? We're set up for volume: production runs, fleets and trailers, fabrication batches, OEM parts, and recurring contract work. If it arrives on a pallet, a rack, or a flatbed, bring it to us.
Scope My Run →
ST-03Process & Quality
Every part earns its way out
OP 10
Intake & Traveler
Parts are counted, inspected, and logged against your PO. Color, film build, and masking requirements travel with the rack, not in somebody's head.
OP 20
Rack & Mask
Parts are hung and fixtured for full coverage, with threads, bores, and mating surfaces masked to the print — before a single tank or gun touches them.
OP 30
Pretreat
Cleaning and chemical conversion on the immersion line so the coating bonds to metal, not to oil and dust.
OP 40
Coat
Electrostatic powder application (or wet paint where spec demands), with attention to Faraday areas, edges, and welds — where cheap jobs fail first.
OP 50
Cure
A full 400°F oven cure to the powder manufacturer's schedule. No short-cycling to squeeze the day.
OP 60
Inspect & Pack
Checked against spec, packed to survive the truck, staged for pickup or delivery on the date we committed to.
Checked before it ships
What "checked"
means here
Quality isn't a slogan on the wall. It's a set of measurements taken before your parts leave.
[✓]
Film thicknessMil-gauge readings against the spec on the traveler, typically 2–4 mils per coat.
[✓]
AdhesionVerified prep and cure so the coating stays bonded under impact and flex.
[✓]
Coverage & appearanceEdges, welds, and recesses inspected under light — the areas that reveal a rushed job.
[✓]
Count & conditionWhat came in goes out: same count, no dings, masked features clean.
ST-04Facility
1510 Brandi Ln · Round Rock
Z-01 Receiving & Racking
Parts counted against the PO, inspected, and hung or fixtured for the line.
Z-02 Pretreat Line
Immersion tanks for cleaning and chem film / chromate conversion ahead of coating.
Z-03 Spray Booth
One dedicated booth handling electrostatic powder application and industrial liquid systems for heat-sensitive parts.
Z-04 Cure Ovens
Holding a stable 400°F for full manufacturer cure schedules on weldments, frames, and racked batches.
Z-05 QC & Staging
Final inspection, packing, and staging so pickups and deliveries leave on the committed date.
ST-05Leadership
Floor-level management
Manager · Protec Industrial Coatings
Jaime Luna
Jaime Luna is the Manager of Protec Industrial Coatings. A U.S. military veteran, he brings discipline, accountability, and a strong sense of urgency to his role, ensuring every project is handled with precision and care. Jaime is known for guiding teams effectively, keeping operations on schedule, and maintaining the highest quality standards. Outside of work, he is a proud father who leads with the same values of responsibility and commitment that define his career.
U.S. Military Veteran
On Schedule · On Spec
ST-06Contact
End of line · Ship
Put us on
your schedule.
Call, email, or send your part drawings and quantities — we'll come back with a real quote and a real date.
Phone
(512) 310-9800
Email
sales@protecpowder.com
Shop
1510 Brandi LnRound Rock, TX 78681 · Get directions ↗
Hours
Mon–Fri8:00 am – 4:30 pm
Walk-in and retail work is welcome as the production schedule allows — call ahead and we'll tell you straight.
Request a
Production Quote
Best fit: production runs, fleet equipment, fabrication batches, OEM parts, and recurring contract coating. To quote fast, include:
- Part type, material, and dimensions (drawings or photos help)
- Quantity and whether it's a one-time run or recurring
- Color / finish spec, and any masking or hardware
- Current condition — bare, painted, rusted, galvanized
- Target date
Prefer to talk it through? (512) 310-9800